FIAT Ghazi is another very economical but utility tractor which is ideal for small farms. This FIAT Ghazi tractor is available for sale at Tractor Provider and can be shipped to any country in Africa.

FIAT Ghazi Tractor Specifications

ENGINE POWER:

At flywheel                     65 HP

OPERATING WEIGHT:

With 6.00 - 16 and 14.9/13-28 tyres, hydraulic lift with 3 -

point linkage cat. 1 - 2, square type fenders with flat top: 1,770Kg.

ENGINE:

Fiat 8035.05

4 - Stroke, Direct Injection Diesel.

Number of Cylinders: 3

Bore and Stroke: 104 x 115 mm

Piston Displacement: 2,931 cu.cm

Compression Ratio: 17:1

Max. Power at 2,500 Rpm: 65HP

Max. Torque at 1,500 Rpm: 22.7 Kgm

Dry-type Cylinder Liners.

Cooling System: Water

Three-row, brass tube and cooper fin radiator.

Force-feed lubrication system.

Distributor-type injection pump with mechanical speed governor.

Four-bearing crankshaft.

12 Volt Starting System; 4 hp motor.

400 Watt Alternator

100/103 Ah battery, located in front of radiator.

FILTERS:

1) Air Filter: Oil-bath with pre-cleaner semiautomatic dust unloader;

2) Fuel Filter: 2 replaceable cartridges;

3) Oil Filter: Easy-to-change, full-flow cartridge.

Vertical exhaust muffler

Fuel tank capacity:  54 Liters

CLUTCH:

Dual Plate, dry type with separate controls

(paddle for transmission and hand lever for PTO).

Diameter of plates: 11in

TRANSMISSION:

Gearbox with constant-mesh gears: 8 forward and 2 reverse speeds.

Synchromesh on 3rd, 4th, 7th, and 8th speeds.

Differential with pedal actuated lock and automatic disconnection.

Single-reduction spur gear final drives.

Gear box mounted starter safety switch.

BRAKES:

Service: Dry, band-type, mechanical control.

Parking: Manual lever on right side of operator.

FRONT AXLE:

Telescopic type, inverted U, variable tread.

TREADS:

Front (8 positions):

1,320 - 1,420 - 1,520 - 1,620 - 1,720 - 1,820 - 1,920 - 2,020 mm

Rear (8 positions):

1,200 - 1,300 - 1,400 - 1,500 - 1,600 - 1,700 - 1,800 - 2,900 mm

STEERING:

Hydro assisted, power steering with Independent Circuit, Turning radius:

- with brakes: 3.1 mm

- without brakes: 3.9mm

DRIVER'S SEAT:

Cushioned Spring Suspension; adjustable.

POWER TAKE-OFF:

1 - 3/8" 6 spline shaft.

Fully independent: 540 rpm at 1,967 engine rpm.

High-speed DTO* (1 - 3/8" Shaft): same speed as engine

(*) for application of belt pulley

HYDRAULIC LIFT:

With draft and position control.

Draft control through top link.

Gear - type pump driven from engine crankshaft.

Pump capacity:  22.7 liter / min.

Relief valve opening pressure: 150 - 170  kg/sq.cm.

Manual Response control.

3 - point linkage cat. 1 - 2

Lower links with sway restrictors and transverse retaining spring.

Control lever with safety stop.

Max. Lifting capacity: 1,650 Kg

TYRES:

Front: 6.00  - 16

Rear: 14.9 / 13 - 28

BODY:

Hood with side-hinged cover for engine inspection.

Front grill is easily removable for quick access to air cleaner and battery.

INSTRUMENT PANEL:

Separate temperature gauge, fuel gauge & tachometer.

LIGHTING SYSTEM:

With 3 -position headlights.

Head Lights Mounted in Front Grill. 

2 pole power connector  (ASAE)

Blue high beam warning light on dashboard

Big Indicator, Parking & Hazard lights

SPEEDS (KPH):

With tyres                  14.9 / 13 - 28

Forward Speed      3.0 / 31.5 kmph

Reverse Speed       4.3 / 15.5 kmph

DIMENSIONS:

(with 6.00 - 16 and 14.9 / 13 - 28 tyres)

STANDARD EQUIPMENT:

Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator's manual 

OPTIONAL EQUIPMENT:

- Front End Weights with Frame
- PTO Pulley (AGRIPAK Design)

- DTO Pulley
- AGRIPAK SunRoof Canopy (Fiber Glass/Hard Top)
- 9 Hole Draw Bar

- Pintle/Trolley Hook (AGRIPAK Design)
- DTO Suction Pump

- High Clearance Kit

- Driver's Cabin