- Home ::
- Implements ::
- Hydraulic Tipping Trailer for Sale: Tractor Implements by Tractor Provider
Hydraulic Tipping Trailer for sale
Hydraulic Tipping Trailer is available with a 55 degree tipping angle size for the material dumping purpose. It is a strongly built tractor implement used for lifting load capacity material of all sizes and consists of a double acting heavy duty ram with a mechanical linkage.
Technical Specifications:
| Description | Spec.A | Spec.B | Spec.C |
| Type | Hydraulic Tipping | Hydraulic Tipping | Hydraulic Tipping |
| Capacity | 4 to 5 Ton | 5 to 8 Ton | 8-10 Ton |
| Vessel Size | 10` X 6.5` X 2` | 11` X 6.5` X 2` | 12` X 7` X2.5` |
| Floor | MS Sheet SWG 10 | ||
| Side Wall | MS Sheet SWG 12 | ||
| Chassis Frame | |||
| Lower Channel: | 8` X 3` | 8` X 3` | 10` X 3` |
| Upper Channel: | 6` X 3` | 6` X 3` | 6` X 3` |
| Axle Size | |||
| Length: | 52" | 52" | 56" |
| Outer Dia: | 5" | 5.5" | 6" |
| Wall Thickness: | 3/8" | 3/8" | 3/8" |
| Rims | |||
| Qty | 2 | 2 | 4 |
| Size: | 8.25-20 | 8.25-20 | 8.25-20 |
| Tipping Device: | Double acting heavy duty locally made Ram with mechanical linkage. | ||
| Tipping Angle: | 55 Degrees. | ||
| Max Lift Time: | 10 Seconds at 1500-1789 rpm of Tractor Engine to its full height in empty condition. | ||
| Hydraulic kit For Trolley: | |||
| Spool Valve: | Imported from USA, Italy or U.K. Minimum Rod Dia. 20mm. | ||
| Selector Valve: | Imported from USA, Italy or U.K. Minimum Rod Dia. 20mm. | ||
| Hyd. Hoses | Imported from above countries, the Crimping and Hoses should bear a pressure of 4000 psi.There should be no joint between two connections. | ||
