New Holland 480s Tractor Specifications

  • ENGINE POWER:


    Fly wheel 55 HP

     

    OPERATING WEIGHT:


    1710 kg

     

    ENGINE:


    New Holland 8035.06
    4 Stroke, Direct, injection diesel
    No of Cylinders 3
    Bore and stroke: 100*115mm
    Piston displacement: 2,710 cc:
    Compression ratio: 17:1
    Max. Torque at 1,500rpm: 22.7 kgm
    Dry-type cylinder liners:
    Cooling System: Water
    Four-row Brass tube &
    Copper Fin Radiator, Force-feed lubrication system.
    Distributor-Type Fuel Injection Pump with
    Mechanical Speed Governor.
    Exhaust Muffler: Vertical
     

    FILTERS:

    Air: oil bath with Pre-Cleaner
    Fuel: 2 replaceable cartridges
    Oil: easy to change. Continuous Flow Cartridge

    CLUTCH:

    Dual Plate, dry–type, with separate controls
    (Pedal for transmission and hand lever for PTO),
    Diameter of Plates: 11 inch
    Plate facing of asbestos compound

    TRACKS

    Front (8 Positions)
    1,320 – 1,420 – 1,520 – 1,620 – 1,720- 1,820 – 1,920 – 2,020 mm

    Rear (8 Positions)
    1,200 – 1,300 – 1,400 – 1,500 – 1,600 – 1,700 – 1,800 – 1,900mm

    TRANSMISSION

    Gearbox with Constant-Mesh Gears:
    8 Forward & 2 Reverse Speeds Synchromesh on 3rd, 4th, 7th, and 8th Speeds Differential Lock with Pedal Actuated Lock and Automatic Disconnection. Single-Reduction Spur Gear Final Drives Gear Box Mounted Starter Safety Switch

    FRONT AXLE

    Telescopic Type, Inverted U, Variable Track

     

    POWER TAKE-OFF

    6 Spline Shaft- 35mm dia 1-3/8”
    Fully Independent: 540 rpm at
    2,160 Engine rpm
    High-Speed PTO(*) 35mm dia -13/8”
    Same Speed as Engine.
    (*) for application of high speed implements.

     

    HYDRAULIC LIFT

    With Draft and Position Control, Draft Control through Top Link, Gear type Hydraulic Pump Driven from Engine Crankshaft,
    Pump Capacity: 22.7 lit/min
    Relief Valve Opening Pressure: 150-170kg/cm
    3Point Linkage Cat I-II
    Manual Response Control
    Lower Links with Sway Restrictors
    Control Lever with Safety Stop
    Max.Lifting Capacity 1540 kg

    DRIVER’S SEAT

    Fully Upholstered with parallelogram suspension, adjustable to driver’s weight.

    STEERING

    Hydro Assisted Power Steering with Independent Circuit. Turning Radius:
    -with Brakes: 3400 mm
    -without Brakes 3900 mm


    BRAKES

    Service dry band-type with mechanical control
    Parking: with Hand Lever

    CAPACITY

    Fuel Tank 54 ltr
    Engine Oil 8 ltr
    Hydraulic Transmission 18 ltr
    Rear Axle 2+2 ltr at both sides
    Air Cleaner 1 ltr

    TYRES

     

    Front 6.00-16
    Rear 12.4/11-28


    LIGHTENING SYSTEM

    3-position headlights, plough lamp, blue high beam warning light on dashborad, low oil pressure warning light.

    OPTIONAL

    Canopy, Towing Hook, Swinging Draw Bar, Cold Starting Aid, Front Weight, High Clearance Kit, Low Clearance Kit, PTO Pump Applications and Creeper Gear etc.

LiveZilla Live Chat Software